Finden Sie schnell pv aluprofil für Ihr Unternehmen: 22 Ergebnisse

Leichtbaupfetten: - max. 9.600 mm bei bis zu 4 mm Stahl möglich - Stanzungen aller Art, je nach Wunsch, Größe und Lage Vorteile von Stahl – Leichtbaupfetten sind: - Hohe Traglasten bei geringem Eigengewicht - Geringes Transportvolumen Alle gekanteten Profile werden gemäß den Zertifizierungen nach DIN ISO 9001:2008 und EN 1090 -2009A1:2011 überwacht und immer weiter optimiert.

Sie sind auf der Suche nach einer nachhaltigen und effizienten Lösung zur Energiegewinnung? Dann sind Sie bei uns genau richtig! Unsere Photovoltaik Großanlagen bieten Ihnen die Möglichkeit, saubere Energie aus Sonnenlicht zu gewinnen und somit Ihren ökologischen Fußabdruck zu reduzieren. Dank unserer langjährigen Erfahrung und Expertise im Bereich der Photovoltaik können wir maßgeschneiderte Lösungen für Ihre individuellen Bedürfnisse anbieten. Unsere Großanlagen sind nicht nur umweltfreundlich, sondern auch wirtschaftlich rentabel. Sie ermöglichen es Ihnen, Ihren Energiebedarf zu decken und gleichzeitig Kosten zu sparen. Mit unseren hochwertigen und langlebigen Photovoltaik Großanlagen können Sie sich auf eine zuverlässige und nachhaltige Energieversorgung verlassen. Zudem leisten Sie einen wichtigen Beitrag zum Klimaschutz und zur Erhaltung unserer Umwelt.

TECASINT 2391 has been developed with 15 % MoS2 from the base polymer TECASINT 2011. It has optimum friction and wear properties in a vacuum, which means it can be used in space travel applications, i POLYIMIDE WITH 15 % MOS2 TECASINT 2391 has been developed with 15 % MoS2 from the base polymer TECASINT 2011. It has optimum friction and wear properties in a vacuum, which means it can be used in space travel applications, in a vacuum or in inert gases (techn. dry). The plastic displays low outgassing in accordance with ESA regulation ECSS-Q-70-20. Alternative to Vespel SP3.

Starting with the base polymer TECASINT 2011, the plastic TECASINT 2061 with 15 % graphite and 10 % PTFE has been developed. This plastic's properties include, above all, low static friction and a low POLYIMIDE WITH 15 % GRAPHITE AND 10 % PTFE Starting with the base polymer TECASINT 2011, the plastic TECASINT 2061 with 15 % graphite and 10 % PTFE has been developed. This plastic's properties include, above all, low static friction and a low coefficient of friction. Owing to its self lubricating property, TECASINT 2061 is very good for dry application. The material is suitable for low friction and low wear applications at medium temperatures (<200°C) and loads.

TECASINT 1011 is an unfilled polyimide natural grade. This material particularly stands out in the TECASINT 1000 product family for very high strength and elongation. It is characterised by properties such as a very high modulus of elasticity, high rigidity, high degree of hardness and low thermal and electrical conductivity. These are accompanied by high purity and low outgassing in accordance with ESA regulation ECSS-Q-70-20. Its previous name was SINTIMID Pur HT.

TECASINT 2021 is a plastic reinforced with 15 % graphite and based on the base polymer TECASINT 2011. It is particularly suitable for tribological applications owing to its improved friction and wear POLYIMIDE WITH 15% GRAPHITE TECASINT 2021 is a plastic reinforced with 15 % graphite and based on the base polymer TECASINT 2011. It is particularly suitable for tribological applications owing to its improved friction and wear behaviour. Thanks to its self lubricating property, TECASINT 2021 is well suited to lubricated and dry applications.

TECASINT 8001 yellow brown has been made from PTFE with a modification of 20% PI. Its properties include reduced creep under load and excellent sliding and friction properties. The material is ideally PTFE WITH 20% POLYIMIDE TECASINT 8001 yellow-brown has been made from PTFE with a modification of 20% PI. Its properties include reduced creep under load and excellent sliding and friction properties. The material is ideally suited to soft mating materials e.g. stainless steel, brass, aluminium or bronze.

The unfilled grade TECASINT 5111 natural is based on the high-performance plastic polyimide, which is characterised by its very good thermal stability with low thermal expansion. UNFILLED POLYIMIDE The unfilled grade TECASINT 5111 natural is based on the high-performance plastic polyimide, which is characterised by its very good thermal stability with low thermal expansion. Polyimides are non-melting polymers with a service temperature of 300 °C, which is considerably higher than that of PEEK or PPS. In addition, TECASINT 5111 natural has a high creep resistance. These properties makes PI plastic ideal for applications where high temperature resistance is required, such as in the aerospace industry. TECASINT 5111 natural has good chemical resistance, especially to light acids and many organic solvents. In combination with the very good electrical insulating properties of the PI material, TECASINT 5111 natural is also perfectly suited for applications in the semiconductor industry, electrical engineering or mechanical engineering. Moreover, the polyimide material has good mechanical properties, good wear resistance and is also resistant to high-energy radiation. TECASINT 5111 natural is produced as polyimide sheet, polyimide rod and tube.

TECASINT 1021 black has been developed from the base polymer TECASINT 1011 natural. Unlike TECASINT 1011, however, it contains 15% graphite. The material has improved friction and wear properties for tribological applications. TECASINT 1021 is suitable for both lubricated and dry applications since it is self lubricating.

TECASINT 8061 has been made from PTFE with a modification of 40 % PI. Compared with TECASINT 8001 it has a lower creep tendency under load, along with outstanding sliding and friction properties. The material is ideally suited to soft mating materials e.g. stainless steel, brass, aluminium or bronze.

Starting with the base polymer TECASINT 1011, TECASINT 1061 with 15% graphite and 10% PTFE has been developed. Its properties include very low static friction and a low coefficient of friction. The ma POLYIMIDE WITH 15 % GRAPHITE AND 10 % PTFE Starting with the base polymer TECASINT 1011, TECASINT 1061 with 15% graphite and 10% PTFE has been developed. Its properties include very low static friction and a low coefficient of friction. The material is self lubricating, which means it also has good properties in dry running conditions. TECASINT 1061 is suitable for low friction and low wear applications at medium temperatures (<200°C) and loads.

Starting with the base polymer TECASINT 1011, TECASINT 1031 has been developed. This material contains 40% graphite, unlike the starting material. TECASINT 1031 has a very high resistance to thermal a

Starting with the base polymer TECASINT 5011, TECASINT 5051 with 30 % glass fibre has been developed. This material is characterised by reduced thermal elongation, reduced moisture absorption and high WITH 30 % GLASS FIBRE Starting with the base polymer TECASINT 5111, TECASINT 5051 with 30 % glass fibre has been developed. This material is characterised by reduced thermal elongation, reduced moisture absorption and high wear strength during chip test applications in the semiconductor industry. It has good electrical insulation properties and surface hardness, and also high rigidity. The glass transition temperature is 330°C, while the maximum service temperature may be – for a short time – up to 300 °C.

TECASINT 2011 is one of the unfilled natural grades. It has a very high modulus of elasticity, high rigidity and hardness. Compared with TECASINT 1011 it has significantly reduced moisture absorption, UNFILLED POLYIMIDE TECASINT 2011 is one of the unfilled natural grades. It has a very high modulus of elasticity, high rigidity and hardness. Compared with TECASINT 1011 it has significantly reduced moisture absorption, higher toughness and better machining properties. Within the TECASINT 2000 series the material has the maximum strength and elongation, together with a high modulus of elasticity and minimal thermal and electrical conductivity. TECASINT 2011 is highly pure with low outgassing in accordance with ESA regulation ECSS-Q-70-20.

Starting with the base polymer TECASINT 2011, TECASINT 2031 with 40 % graphite has been developed. The plastic has high resistance to thermal ageing and improved self lubrication. This is accompanied POLYIMIDE WITH 40 % GRAPHITE Starting with the base polymer TECASINT 2011, TECASINT 2031 with 40 % graphite has been developed. The plastic has high resistance to thermal ageing and improved self lubrication. This is accompanied by minimised thermal elongation for dimensionally stable components and increased creep strength.

Compared with the other TECASINT materials the TECASINT 4100 series exhibits extremely high thermal stability (HDT/A=470°C), extremely low moisture absorption and high mechanical rigidity. UNFILLED POLYIMIDE Compared with the other TECASINT materials the TECASINT 4100 series exhibits extremely high thermal stability, extremely low moisture absorption and high mechanical rigidity. This is accompanied by a very high oxidative stability and increased resistance to chemicals. TECASINT 4111 has a very high thermal stability (HDT/A=470°C). Rigidity and modulus are significantly increased vis-a-vis conventional polyimides in a temperature range up to 400 °C. The material has minimal thermal and electrical conductivity. The plastic is highly pure with low outgassing in accordance with ESA regulation ECSS-Q-70-20.

Compared with the other TECASINT materials the TECASINT 4000 series exhibits very low moisture absorption and high oxidative stability along with improved chemical resistance. Despite its high strengt UNFILLED POLYIMIDE Compared with the other TECASINT materials the TECASINT 4000 series exhibits very low moisture absorption and high oxidative stability along with improved chemical resistance. Despite its high strength, TECASINT 4011 has high elongation at break and toughness. Rigidity and modulus are significantly increased vis-a-vis conventional polyimides in a temperature range up to 260°C. It also has minimal thermal and electrical conductivity. The plastic is highly pure and displays low outgassing in accordance with ESA regulation ECSS-Q-70-20.

TECASINT 4121 is based on the base polymer TECASINT 4111, plus 15% graphite. The material is particularly suitable for tribological applications thanks to its improved friction and wear behaviour. Thanks to its self lubricating property, TECASINT 4121 is well suited to dry applications.

Starting with the base polymer TECASINT 4011, TECASINT 4021 with 15% graphite has been developed. Thanks to the improved friction and wear properties, TECASINT 4011 is particularly suitable for tribol POLYIMIDE WITH 15 % GRAPHITE Starting with the base polymer TECASINT 4011, TECASINT 4021 with 15% graphite has been developed. Thanks to the improved friction and wear properties, TECASINT 4011 is particularly suitable for tribological applications. It is also suitable for dry applications since the material is self lubricating.

Feingeflecht von 4.0 mm bis 12.0 mm Durchmesser große Farbauswahl EIGENSCHAFTEN - hohe Dehnung - kompakte und runde Schnur - glatte Oberfläche - gute Chemikalienbeständigkeit - UV-stabilisiert - schwimmt auf Wasser EINSATZBEREICHE - Allzweckleine - Industrie

Pfettenschuhe Verzinkt bis 4 mm Blechstärke - Schwarz bis 16 mm Blechstärke möglich. Die maximale Breite der Pfetten Schuhe beträgt 250 mm

VON DEN VORAUSDENKERN BEI INDUSTRIESCHLÄUCHEN Unsere gewellten PTFE -Schläuche kombinieren optimale Flexibilität mit einer einfachen Handhabung und kommen daher in verschiedensten industriellen Anwendungsgebieten zum Einsatz. Vor allem in der chemischen und pharmazeutischen Industrie sowie in der Lebensmittel- und Getränkeindustrie werden sie häufig eingesetzt. Denn unsere PTFE-Wellschläuche eignen sich auch bei aggressiven Medien und für die Nutzung unter speziellen Bedingungen. Wenn es um höchste Ansprüche geht, ist Neotecha Ihr perfekter Partner. Entdecken Sie die verschiedenen Ausführungen unserer gewellten PTFE-Schläuche! Zu den Produkten Gewellte PTFE-Schläuche Glatte PTFE-Schläuche Silikonschläuche Ableitfähiger PTFE-Schlauch mit Para-Aramid-Umflechtung | Typ NFN-A Ableitfähiger PTFE-Schlauch mit Polypropylen-Umflechtung | Typ NFP-A Ableitfähiger PTFE-Wellschlauch | Typ NW-A Ableitfähiger PTFE-Wellschlauch mit Edelstahlumflechtung | Typ NFR-A PTFE-Schlauch mit Para-Aramid-Umflechtung | Typ NFN PTFE-Schlauch mit Polypropylen-Umflechtung | Typ NFP PTFE-Schlauch mit Vakuumstützspirale und Para-Aramid-Umflechtung | Typ NFN-AV PTFE-Schlauch mit Vakuumstützspirale und Para-Aramid-Umflechtung | Typ NFN-V PTFE-Wellschlauch | Typ NW PTFE-Wellschlauch mit Edelstahlumflechtung | Typ ECB PTFE-Wellschlauch mit Edelstahlumflechtung | Typ ECB-A PTFE-Wellschlauch mit Edelstahlumflechtung | Typ NFR PTFE-Wellschlauch mit Edelstahlumflechtung und Silikonmantel | Typ ECB-S PTFE-Wellschlauch mit Edelstahlumflechtung und Silikonmantel | Typ NFR-S PTFE-Wellschlauch mit Edelstahlumflechtung und Vakuumstützspirale | Typ NFR-AV